Choosing Between Different Evaporator Coil Configurations With Your Reliable Air Conditioning Service Provider | Chandler, AZ

When searching for an air conditioner or an HVAC system, one of the most important things to consider is the configuration of the evaporator coils. The main configurations are horizontal and vertical coils. But are there any differences between the two? The short answer is that there is a difference. However, when choosing between vertical or horizontal evaporator coils, the main thing that you must consider is the installation space. Typically, vertical HVAC evaporators are installed to ensure vertical airflow. However, should you have a narrow installation space, consider having the air conditioning service provider install horizontal evaporator coils. This article will teach you more about horizontal and vertical evaporator coils.

Which Configuration of Evaporator Coil Should You Install?

As mentioned above, two primary configurations for AC evaporator coils are horizontal and vertical. However, choosing the right config is critical to how the air conditioner will function. Hence, it is recommended that you reach out to your reliable air conditioning service provider before you purchase either.

Horizontal Air Conditioner Evaporator Coils

In a horizontal configuration, the evaporator coil is positioned horizontally within the air handler or furnace, as opposed to a vertical configuration where the coil is positioned vertically. Air is expelled from one side and drawn from the other. However, they have a lower efficiency compared to the vertical units. To install a horizontal evaporator coil, the air handler or furnace must be large enough to accommodate the coil in a horizontal position. The coil is typically connected to the air handler or furnace using a series of connectors and refrigerant lines, which transport the refrigerant to and from the coil. Horizontal evaporator coil configuration has the following benefits:

Allows for Efficient Cooling

The main advantage of a horizontal evaporator coil is that it takes up less space than a vertical coil, which makes it a good option for installations where space is limited. This is because the evaporator coils and blower fans are aligned. Additionally, the horizontal configuration allows for better airflow over the coil, improving the air conditioning system’s efficiency. The air conditioning service provider in Chandler, AZ can install them in narrow attics and crawl spaces.

Easier to Maintain and Clean

Another benefit of the horizontal evaporator coil is that they are easier to clean and maintain. Because the coil is positioned horizontally, it is more accessible and easier to clean than a vertical coil. Additionally, the horizontal orientation of the coil allows for better drainage, which can help to prevent the accumulation of moisture and mold within the unit.

They Are More Durable Compared to Vertical Evaporator Configurations

Horizontal evaporator coils are typically more durable and long-lasting than vertical coils. This is because the horizontal orientation of the coil allows for more even distribution of stress and weight, which can help to prevent the coil from becoming damaged or distorted over time. Therefore, if replacing your vertical evaporator coil, have the air conditioning service provider replace it with a horizontal configuration.

Vertical Air Conditioner Evaporator Coil Configuration

A vertical air conditioner evaporator coil configuration is a type of air conditioning system in which the evaporator coil is oriented in a vertical position. This configuration is commonly used in window-mounted air conditioners and other compact air conditioning systems. The evaporator coil is responsible for absorbing heat from the air inside the room, which is then transferred to the condenser coil outside the building.

In these systems, the down-flow or up-flow of the air is usually relative to the blower fan’s position. In the basement installation, the coils are located above the blower fans that produce an up flow of air. This is an energy-efficient option as the hot air in evaporators will rise naturally. The ideal option for those with enough space in their basements is vertical AC evaporator configurations.

If you don’t have a basement, you can have the air conditioning service provider install the vertical air conditioner evaporator coils in the attic. In such units, the evaporator coils will be below the blower fan. Hence, the warm air gets expelled at the bottom part of the air conditioner, creating an energy-efficient down-flow air movement. Below are the main advantages of vertical evaporator coil configuration:

Efficient Cooling and Performance

One advantage of having an air conditioning service provider in Chandler, AZ install a vertical evaporator coil configuration is that it allows for more efficient cooling of the air in the room. This is because the coil is positioned closer to the air intake grille, allowing it to absorb heat from the incoming air. Additionally, the vertical orientation of the coil allows for better air circulation, which can help to distribute cooled air more evenly throughout the room.

Enhanced Durability

Vertical air conditioner evaporator coils are also known for their durability and long lifespan. This is because they are typically made of high-quality materials, such as copper or aluminum, which are resistant to corrosion and other forms of damage. As a result, vertical evaporator coils can last for many years with minimal air conditioning service.

Space-Efficient Design

One of the main benefits of a vertical air conditioner evaporator coil configuration is that it is more space-efficient than other air conditioning systems. Because the evaporator coil is oriented in a vertical position, it takes up less space and is easier for the air conditioning service provider to fit into a window opening. This makes it ideal for use in small rooms or apartments with limited space. Hence, you might want to consider these units if you don’t have enough space.

Are you still on the fence regarding which configuration to use for your home air conditioner? At One Hour Air Conditioning & Heating of Phoenix, we can help. Our licensed, experienced, and reputable air conditioning service providers can help you navigate both configurations, explaining the drawbacks and benefits of each. Contact us today for all your AC repair, maintenance, and duct cleaning needs in Chandler, AZ.

Photo By EuToch at istock
Geothermal vs Heat Pump Systems: A Smart Homeowner’s Guide

Have you ever found yourself pondering the differences between geothermal vs heat pump systems for y... read more

Quick Fix: Emergency Heating and AC Repair Solutions

Have you ever found yourself in the grip of a heating or AC emergency?  It’s a situation that... read more

Air Conditioning Repair: The Ultimate Guide to Keeping Cool

Have you ever found yourself sweating on a hot day because your air conditioner decided to take a br... read more

http://Furnace%20Repair%20Service%20Chandler,%20AZ

LOCATION

Phoenix, AZ 85001
License #ROC339225

http://AC%20Repair%20Mesa,%20AZ

HOURS

Mon–Fri | 7:00 am–4:00pm
24/7 Emergency Service